SDI & CameraLink

The CB-SDI3G0T is a Display Controller device which accepts one digital graphics input data streams. One data stream inputs through an LVDS receiver from a digital video source. With on-board video processing FPGA Xilinx XC7K160T, CB-SDI3G0T provide up to two high-resolution and real-time video conversion SDI channels, supporting 1920x1080p at 60Hz refresh rate. 



  • Supports YUV 4:2:2 and YUV 4:2:0 color space
  • Provision to insert ancillary data
  • Standards compliance:
    • SMPTE ST 259: SD-SDI at 270 Mb/s
    • SMPTE ST 292: HD-SDI at 1.485 Gb/s and 1.485/1.001 Gb/s
    • SMPTE ST 424: 3G-SDI with data mapped by any ST 425-x mapping at 2.97 Gb/s and 2.97/1.001 Gb/s
  • Supported Video Format: 
    • 525i@59.96, 625i@50
    • 720p@50/59.94/60
    • 1080i@50/59.94/60


Video Input
Interface 1 x LVDS Connector
Impendence 100 Ohm Differential 
Video Output
Interface 1/2x BNC/HD-BNC Connector
Impendence 75 Ohm Single Ended
SDI Video 
Max. Transmission Rate 2.97 Gbps
Max. Clock Rate 148.5 MHz
  • 525i@59.96, 625i@50 Hz
  • 720p@50/59.94/60 Hz
  • 1080i@50/59.94/60 Hz
  • 1080p@50/59.94/60 Hz
Power Connection
Connector 1 x DC plug
Supply Voltage DC5V
Environment Condition
Operating Temperature -0 ~ +60
Storage Temperature -40 ~ +85
Mechanical Information
Dimensions 100mm (W) x 100mm (L)


Ordering Information

Model Description
CB-SDI3G0T LVDS to 3G-SDI Translate module
CB-SDI3G0T-HD LVDS to HD-SDI Translate module
CB-SDI3G0T-6 LVDS to 6G-SDI Translate module